Accessories

Listed below are a sample of what we can supply in addition to our instrumentation, followed by a more detailed descriptions of each item.

	Electrochemical Cell kit
	Electrochemical H-Cell
	Hot Plate with Remote Temperature Sensor
	Noise Reduction Probes
	Saturated Calomel Electrode
	Silver Silver Chloride Electrode
	Platinum auxiliary electrode
	Guard Ring (see application notes)
		Guard Ring segments (per segment)
		Suitable Probe

Electrochemical Cell kit [Specifications]

The 1 Litre Quickfit type Electrochemical Cell is supplied with the following: Sealed 1 Litre Reaction Vessel; Platinum Band Type Auxiliary Electrode; Saturated Calomel Reference Electrode; Reservoir; Lugging Probe with Tubing; Storage Bottle; Platinum Mains Noise Reduction Electrode; Retort Stand; 0-105°C Thermometer; Glass Frit; Exhaust and a two Electrode Probe. The retractable Probe fits in the centre of the cell and accommodates two standard 4.5cm2 screw on electrodes for galvanic C&V Noise or 2 Electrode LPR studies. The access hole in the centre of the cell which is normally used for the 2 Electrode Probe is supplied with an adapter for fitting of other probe types to suit your requirements. The adapter supplied with the Lugging Probe can be removed in order to directly place the reference electrode into the cell.

H-Cell

Two 1 Litre Quickfit type Electrochemical Cells connected by a glass tube with a scinted glass barrier.

Hot Plate with Remote Temperature Sensor

(stand not included)

Noise Reduction Probe

Noise Reduction Probes can reduce mains signal polarisation of your test electrodes from as much as a few volts to just a few mV’s. The root cause of this problem is the different levels of mains pick up between the Reference Electrode and the Test Electrode. In a simple cell where the reference electrode is just a piece of metal immersed in the bulk test solution mains pick up is not generally a significant problem. The problem arises when the Reference Electrode is in its own separate solution. This is true for typical commercial Reference Electrodes and especially for any remote Reference Electrode connected to the cell via a salt bridge.

Saturated Calomel Electrode

Silver Silver Chloride Electrode